Cutting Granite Countertops
Granite Countertops Calgary - Can You Use Granite As a Cutting Board?
Cleaning Granite Countertop
How to Clean a Granite Countertop
Homeowners looking to upgrade their kitchens are installing granite countertops for a durable, low maintenance work surface. Proper care of granite countertops ensures the durability and longevity expected from this premium product. But homeowners aren't always familiar with the proper methods for cleaning granite countertops, so we offer the following:
Cleaning Granite Countertops
As each natural stone or mineral surface can vary, your granite countertop may have specific cleaning requirements specified by the supplier or builder. The following method is a general guide for polished granite countertops:
For Everyday Cleaning
1. Do not use abrasives or harsh cleaners, as they can wear down and damage the polished surface.
2. Wipe the granite countertop down lightly with a dry, soft cloth to remove crumbs or debris.
3. Use warm water and a very small amount of ph-balanced dish soap and wipe down the surface.
4. Dry lightly with a dishtowel.
For Periodic or Weekly Cleaning
1. Wipe the countertop down lightly with a dry, soft cloth.
2. Spray a mist of recommended granite cleaner over the surface.
3. Let the product soak for approximately 1 minute.
4. Clean with a sponge or soft towel or rag.
5. Buff and dry the surface with a clean towel or paper towel.
Maintaining Granite Countertops
Granite is one of the hardest stone surfaces there is, second only to diamonds, but granite is created from molten rock, and can contain softer minerals. While granite countertops may be honed, in other words, have a flat finish, a polished surface is recommended for kitchen granite countertops.
1. Avoid letting acidic foods and liquids, such as wine, vinegar or lemon, set on the countertop, as it can affect the surface. Wiping down the countertop after use can help keep damaging products from being left in contact with the surface.
2. Use a cutting board for food preparation, do not cut food directly on the countertop.
3. Do not use powder cleaning products or harsh cleaning products.
4. Use a penetrating sealant recommended by your supplier or builder annually. Make sure the granite countertop sealant is one that actually penetrates the surface, otherwise a cloudy film may remain, and the surface may need to be stripped and resealed to get your shine back.
Removing Stains from Granite Countertops
Granite countertops are often chosen over marble since they are less porous and more stain resistant. But if you should happen to have a stain, remove it by mixing a ‘paste' of:
- One Tablespoon of PH-balanced, mild dishwashing soap;
- ½ Cup of Flour
Add water to make a pasty consistency. Cover stain with the solution, and leave for one hour. Remove the hardened paste carefully using the edge of a credit card or wooden utensil. Rinse the area. If the stain remains, try the solution again, leaving overnight covered with a plastic wrap. Remove and rinse.
 How to Fabricate Granite Countertop DIY - Cut & Polish Undermount Sink Sale Price: $19.95  Eligible for free shipping!Availability: Usually ships in 1-2 business days See Reviews For This Product DescriptionThis is a video on how to fabricate granite undermount kitchen sink for Do-It-Yourselfers. The project was to replace a top mount granite kitchen sink with an undermount granite kitchen sink. We took a piece of matching "pre-fabbed" granite slab (by pre-fabbed we mean the edge has been pre-fabricated), cut the sink hole and polished the entire sink edges. In this 28 minute video, Buren Smith, our 25-year veteran stone fabricator, demonstrates the following skills and techniques: 1. Templating; 2. Using variable speed angle grinder; 3. Straight cutting with grinder and turbo blade; 4. Curved cutting with contour blade; 5. Smoothing curve cuts with drum wheel; 6. Polishing undermount sink with dry polishing pads; 7. Drill a faucet hole with Sure-Guide and dry core bit. This video demonstrates fabrication of a rectangular undermount sink. These skills and tools can also be applied to fabricating oval undermount sinks and vessel bowls. Features
 |
 ROTOZIP XC-T750 Xcore 3/4-Inch Hole Saw Kit List Price: Sale Price: $39.49 You save: $26.17 (40%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionIncludes Xcore 3/4" Hole Saw Bit - XC-T750 Features
|
 The Ragged Edge List Price: See Reviews For This Product DescriptionThe Master is inordinately fond of young fools. That is why theyare permitted to rush in where angels fear to tread--and survivetheir daring! This supreme protection, this unwritten warranty todisregard all laws, occult or apparent, divine or earthly, may beattributed to the fact that none but young fools dream gloriously.For such of us as pretend to be wise--and we are but fools in alesser degree--we know that humanity moves onward only by theimpellant of fine dreams. Sometimes these dreams are simple andtender; sometimes they are magnificent.With what airs we human atoms invest ourselves! What ridiculousfancies of our importance! We believe we have destinies, when wehave only destinations: that we are something immortal, when eachof us is in truth only the repository of a dream. The dream flowersand is harvested, and we are left by the wayside, having served oursingular purpose in the scheme of progress: as the orange is tossedaside when sucked of its ruddy juice.We middle-aged fools and we old fools can no longer dream. We haveonly those phantoms called memories, which are the husks of dreams.Disillusion stands in one doorway of our house and Mockery in theother.This is a tale of two young fools. |
 SECCO 316WVPOLSET 3/16-Inch Radius Wet Polisher Kit List Price: Sale Price: $213.55 You save: $75.45 (26%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionThis kit includes a SECCO variable speed wet polisher & 3/16" radius profile wheel. The polishing pad set includes 1 each 50, 100, 200, 400, 800, 1500 and 3000 grit. This set INCLUDES the rubber backer pad needed to attach the diamond pads to the polisher. This kit includes a 3/16" radius vacuum brazed diamond profile wheel. This vacuum brazed profile wheel is designed to produce a 3/16" radius on natural or engineered stone and concrete. Very simple to use, the wheel screws directly on this tool. Our profile wheels feature an internal water feed for optimum cooling of the bit. A nylon guide on the top of the bit rides on the surface of the stone and a lower bearing controls the depth of cut for consistent shaping. Turn on the water and the grinder, apply some force parallel with the working surface, you're on your way to that custom edge. After you shape the edge, attach the included Velcro backing pad onto the grinder and start polishing with the 100 grit pad (50 grit included however it is very aggressive and should be used with caution). Continue polishing with each grit included with this kit and the factory shine can be achieved. Features
|
 Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE List Price: Sale Price: $25.19 You save: $24.81 (50%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionProfessional Quality Industrial Diamond Hole SawsThe diamond coating on these saws give superior performance and life. Excellent results in glass, marble, slate, and tile. Nickel plated.Segmented design works better and lasts longer.Includes 5 most popular sizes: 1/8" shank - 1/4", 5/16", 3/8"1/4" shank - 1/2", 1"Note: To prolong the life of these bits, use on a low speed with coolant (water/oil) Features
|
 Sabatier 16-by-20-Inch Glass Utility Cutting Board List Price: Sale Price: $21.95 You save: $3.05 (12%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionFarberware Sabatier 16" X 20" Glass Utility Board Features
|
 How To Fabricate Granite Countertop DVDs - Edge Profile/Polish & Undermount Sink List Price: Sale Price: $34.90 You save: $25.00 (42%) Eligible for free shipping!Availability: Usually ships in 1-2 business days See Reviews For This Product DescriptionHow to Fabricate Granite Countertop - Profile & Polish This is a video on how to profile and polish granite countertop for Do-It-Yourselfers. We turned a piece of 3 cm (1-1/4") granite with very rough edge into a beautifully polished 3/8" radius edge. In this 26 minute video, Buren Smith, our 25-year veteran stone fabricator, demonstrates the following skills and techniques: 1. Safety Products for your protection; 2. Using variable speed angle grinder; 3. Grinding with turbo diamond cup wheel; 4. Straight cutting with turbo diamond blade; 5. Creating radius profile with hand profiler; 6. Edge Polishing with dry diamond polishing pads; 7. Re-sharpening of glazed polishing pads; The video introduces different tools to be used for edge profiling and polishing, and unveils the mystery of granite fabrication. You will surely find this video very informational and instructive if you ever want to tackle such a project that has seemed to be mission impossible before. How to Fabricate Granite Countertop - Undermount Sink This is a video on how to fabricate granite undermount kitchen sink for Do-It-Yourselfers. The project was to replace a top mount granite kitchen sink with an undermount sink. We took a piece of matching "pre-fabbed" granite slab, cut the sink hole and polished the entire sink edges. In this 28 minute video, Buren Smith, our 25-year veteran stone fabricator, demonstrates the following skills and techniques: 1. Templating; 2. Using variable speed angle grinder; 3. Straight cutting with grinder and turbo blade; 4. Curved cutting with contour blade; 5. Smoothing curve cuts with drum wheel; 6. Polishing undermount sink with dry polishing pads; 7. Drill a faucet hole with Sure-Guide and dry core bit. This video demonstrates fabrication of a rectangular undermount sink. These skills and tools can also be applied to fabricating oval undermount sinks and vessel bowls. Features
|
 Instant Counter Glass Burner Cover Granite (look) Cutting Board Sale Price: $13.99 Eligible for free shipping!Availability: Usually ships in 1-2 business days See Reviews For This Product DescriptionInstant Counter Granite Glass Burner Cover Cutting Board. One 20 1/2" x 11 3/4" tempered glass cutting board with 1 3/4" high, heat resistant silicone capped feet. Creatively solves counter space problems in homes, apartments, motor homes and RV's by creating additional counter space over the stove top and/or kitchen sink. Fits standard range tops with gas, electric or ceramic burners. Features
|
 ROTOZIP XC-T1000 Xcore 1-Inch Hole Saw Kit List Price: Sale Price: $42.49 You save: $34.13 (45%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionIncludes Xcore 1" Hole Saw Bit - XC-T1000 Features
|
-
Click For Price HardwareAndTools.com
Stone Care Protective Countertop Polish for Granite Stone And Marble Countertops 8 Ounces 00909 by Homax
Polishes and protects marble countertops, marble vanities, granite countertops, marble shower walls, marble columns and all other types of natural...